1/2" Simpson MCR05012 Rebar Cutter Wood-To-Steel Screw Guns ) gap is allowed between

) gap is allowed between the end of the header and the face of the jamb stud

A wide array of value-engineered hole patterns are available that will accommodate different load levels while minimizing installed cost

making them ideal for both temporary and permanent fastening jobs

162" x 2 1/2" nails into the header and 0

SawTooth™ Point – Fast starts and smooth driving without the need to pre-drill

1/2" Simpson MCR05012 Rebar Cutter Wood-To-Steel Screw Guns ) gap is allowed betweenWhen hole placement conflicts with rebar or wire mesh, these bits allow the rebar to be removed so the hole can be drilled to the proper depth. Simpson rebar cutters are separate from shanks. A shank adaptor designed for the rotohammer in use is required (sold separately). Shanks work will all sizes of rebar cutters. The overall length of this rebar cutter is approximately 15".